顎式破碎機

PE顎式破碎機主要用于對各種礦石與大塊物料的中等粒度破碎，也可用于生產路基所需石料以及建筑用的石子骨料。顎式破碎機廣泛運用于礦山、冶金、建材、公路、鐵路、水利和化工等行業，被破碎物料的最高抗壓強度為320Mpa。

PE series jaw crusher has features of great crush ratio,even granularity, easy maintenance and lessoperation cost etc,and is widely used in the industries of mining,metallurgy,buildingmaterial,highway,railway,water conservancy and chemistry etc. For crushing various material with compressive strength less than 320 Mpa.

● 產品特點：

破碎比大，產品粒度均勻，結構簡單，性能可靠，維修方便，運營成本低；大擺角，短肘板，破碎力強，產量高;

● Features:

Simple structure, reliable operation, Easy maintenance, low operation cost;Sharp nip angle, short toggle, large crushing strength, high production;

● 產品參數 Main specification:

Note:Specifications are subject to change without futher notice.

注：規格型號如有變動，恕不另行通知。

-------------------------------------------------------------------------------------------------------------------------------------------

PEW系列顎式破碎機

PEW系列顎式破碎機是我公司總結多年的實踐經驗，引進國外技術，優化結構，從實際的價格和技術使用條件上符合廠家的要求，針對市場需求研發的又一代新型產品。該產品軸承座采用整體式鑄鋼結構，結構穩定，性能可靠；“V”型破碎腔和齒形護板設計更加的合理，使得破碎率和產量最大化，提高顎板的利用率；配備液壓油站，液壓控制，清腔方便，大大減少了停機時間；采用楔塊排料口調節系統，在液壓系統配合下，實現自動化，比老式的墊片式排料口調節系統更簡單、安全、快捷。

PEW系列顎式破碎機主要用于對各種礦石與大塊物料的中等粒度破碎，也可用于生產路基所需石料及建筑所用的石子骨料。廣泛適用于礦山、冶金、建材、公路、鐵路、水利、化工等行業。

PEW series crusher is our latest type jaw crusher, combining our many years manufacturing experience, feedback from our customers and foreign technology. This series of jaw crusher has features of great crushing ratio, even granularity, easy maintenance and less operating cost etc,and is widely used in the industries of mining ,metallurgy, building material, highway, railway, water conservancy and chemistry etc. When it Works ,motor drives the eccentric shaft rotation through the belt pulley to make the movable jaw close and leave the fixed jaw periodically,then the materials will be broken into small with squeeze, rub,grind and multiple, so that the materials gradually fall until row out of the discharge opening.

Advantages:-lntegrated with electrical motor seat, easy installation;-V shaped crushing cavity, large feed opening, and low wearage;-Equipped with hydraulic system, easy to adjust the dischargesize,and even distribution of crushing force across the jaw plate;-Reliable and long service life.

● 結構示意圖 Main Structure

1-護板

2-動鄂壓緊塊

3-邊護板

4-定鄂壓緊塊

5-墊板

6-肘板

7-CSS 調整座

8-液壓彈簧

9-出料護板

10-支撐座

1-Protector plate

2-Moving jaw retention wedge

3-Abration resistant side liners

4-Fixed jaw retention wedge

5-Replaceable backing plate

6-Rolling end toggle

7-CSS wedge adjustment

8-Hydraulic tention spring

9-Extended jaw face liners for discharge protection

10-Bolted adjustable support feet

● 主要技術參數 Main Technical parameters